SBR elevator belting

SBR elevator belts are anti-static. The plies are polyester interwoven with nylon layers. The belt is made out of SBR (Styrene Butadiene Rubber).

 

Download PDF-SBR Elevator belting
banden-rol-zwart.png

The covers make it possible that the elevator bolt head will fit and countersunk perfectly. These belts are available in several breaking loads and thicknesses.

SBR (Styrene Butadiene Rubber) covers are high abrasion resistant. This belt quality is suitable to transport products with a low fat, oil and acid content.
Ideal for industrial purposes such as: sand, gravel, glass cullets and dry bulk powders. Also for agro bulk industry. For example grain and cereals.

In addition, there are special temperature resistant elevator belts suitable for tempertures up to a maximum of 180 °C. Also flame retardant belts in accordance with DIN 22103 are available on demand.

Belts are cut and punched according to customers specifications.

 

Technical specifications SBR 
Production requirement acc. DIN 22102 and 22104
Pre stretched plies Nylon / Polyester
Maximum elongation 1,5% 
 Covers SBR 60° Shore A 
Breaking load covers  >= 20 N/mm 
Abrasion <= 150 mm³ 
Density of covers 1,20 +/- 0,3 g/cm³ 
Temperature resistance -25 till 70 °C 

 

SBR Elevator belting              
Type of belt Breaking load number of inserts covers belt thickness Weight/m2 Pulley-Ø*
400/3 400 kg/cm2 3 1+1 mm 5 mm 6,6 kg 315 mm
400/3 400 kg/cm2 3 2+2 mm 7 mm 7,8 kg 315 mm
500/4 500 kg/cm2 4 1+1 mm 6 mm 7,8 kg 400 mm
500/4 500 kg/cm2 4 2+2 mm 8 mm 9,0 kg 400 mm
630/4 630 kg/cm2 4 1+1 mm 7 mm 9,0 kg 500 mm
630/4 630 kg/cm2 4 2+2 mm 9 mm 10,2 kg 500 mm
800/5 800 kg/cm2 5 1+1 mm 8 mm 10,8 kg 630 mm
800/5 800 kg/cm2 5 2+2 mm 10 mm 11,4 kg 630 mm
1000/5 1.000 kg/cm2 5 1+1 mm 8 mm 12,0 kg 800 mm
1000/5 1.000 kg/cm2 5 2+2 mm 10 mm 12,6 kg 800 mm
1250/5 1.250 kg/cm2 5 2+2 mm 12 mm 14,4 kg 1.000 mm

* Recomended minimal pulley diameter (60 - 100% use of breaking load)